? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron _______ semiconductor technical data data sheet 5033, rev. - three phase full wave rectifier assembly with fuses description: 600, 800, or 1000 volt, 40 amp, 5000 ns 3-phase full wave rectifier assembly with fuses in each dc leg. feature: a dielectric withstanding voltage test will be perfo rmed with the metal case of the assembly connected to ground and all four terminals connected to the high potential side of a dc power supply or scope display test. voltage applied shall be 2800 vdc and held for 10 seconds. max ratings/electrical charactristics all ratings are at t c = 25 c unless otherwise specified rating symbol min max. units peak inverse voltage (per leg) F483GH f483hh f483ih piv 600 800 1000 volts maximum forward voltage drop (per leg) (i f = 39a dc) v f 1.2 volts maximum dc output current (t c = 55 o c) (t c = 100 o c) i o 40 21 amps amps peak single cycle surge current t p =8.3 ms single half cycle sine wave i fsm 275 amps fusing current (i fuse ) t a = 25 o c 310 390 amps maximum reverse recovery time (i f = 0.5a, i r = 1.0a, i rr = 0.25a) t rr 5000 ns maximum reverse current i r @ piv (per leg) (t c = 25 o c) t c = 100 o c) i r 10 200 a a maximum thermal resistance (per leg) r jc .85 c/w maximum operating and storage temperature range t j, stg -55 + 150 c F483GH f483hh f483ih
? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 5033, - mechanical dimensions: in inches / mm ac ac ac + ? .770 .730 (19.56 18.54) .395 .355 (10.03 9.02) .395 .355 (10.03 9.02) .395 .355 (10.03 9.02) .395 .355 (10.03 9.02) .270 .230 (6.86) 5.84) 1.53 1.47 (38.86 37.34) ?+ ac ac ac .395 .355 (10.03 9.02) .82 max. (20.83) .59 .39 (12.95 9.91) .15 .09 (3.81 2.29) 2.28 2.22 (57.91 56.39) 1.90 1.84 (48.26 46.74) .208 .168 (5.28 4.27) .320 max (8.13) .189 .149 (4.80 3.78 ) dia (2 places) .125 .100 (3.18 2.54) .030 .015 (.76 .38) .151 .141 (3.84 3.58) .118 .108 (3.00 2.74) *case--black anodized. potting surface?uncontrolled F483GH f483hh f483ih disclaimer: 1- the information given herein, including the specifications and dimensions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchasers are advised to c ontact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devi ces that feature assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any damag es that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitron semi conductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of informa tion, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any failure in a semiconduc tor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any third pa rty or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permissi on of sensitron semiconductor. 7- the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any thir d party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulatio ns fig. 424
|
